Marlex HDPE HXM 50100S BULK
JAVA AREA
HDPE
Blown Film
Bukitmega Masabadi
Bukitmega Masabadi
Lihat Profil SellerPremium hexene copolymer HDPE for large blow-molded and thermoformed parts requiring superior ESCR, impact strength, and rigidity
Marlex® HXM 50100S is an extra-high molecular weight hexene copolymer polyethylene engineered for demanding industrial applications. Designed for large blow-molded and thermoformed components, it delivers exceptional environmental stress crack resistance (ESCR >1000 hours), outstanding low-temperature impact strength (brittleness temp < -75°C), high rigidity, and excellent melt strength. Compliant with FDA 21 CFR 177.1520(c) for food contact under specified conditions and listed in Drug Master File #1016, it meets ASTM D4976 – PE 235 standards. Ideal for fuel tanks, agricultural containers, automotive dunnage, playground equipment, and chemical storage drums where durability and safety are critical.
Specifications
- Density: 0.948 g/cm³ (ASTM D1505)
- Melt Index (190°C/2.16 kg): 0.06 g/10 min (ASTM D1238)
- Tensile Strength at Yield: 25 MPa (ASTM D638)
- Elongation at Break: 700% (ASTM D638)
- Environmental Stress Crack Resistance (ESCR): >1000 hours (ASTM D1693)
- Brittleness Temperature: < -75°C (ASTM D746)
- Tensile Impact Strength: 190 kJ/m² (ASTM D1822)
- Heat Deflection Temperature (0.45 MPa): 78°C (ASTM D648)
Applications
- Large blow-molded containers (e.g., fuel tanks, jerrycans, open-top drums)
- Thermoformed agricultural and chemical storage tanks
- Automotive dunnage and truck bedliners
- Playground and outdoor recreational equipment
- Industrial shipping containers
- Food-contact compliant packaging (under FDA conditions)
Advantages
- Exceptional environmental stress crack resistance (>1000 hours)
- Outstanding low-temperature impact performance (< -75°C brittleness point)
- High molecular weight for superior toughness and melt strength
- Excellent ductility with 700% elongation at break
- FDA-compliant for specific food contact applications
- Meets ASTM D4976 PE 235 and referenced in DMF #1016
Processing Conditions
- Extrusion blow molding: recommended melt temperature 190–220°C
- Thermoforming: preheat to 120–150°C depending on part geometry
- Drying not typically required; ensure resin is dry if exposed to moisture
- Use standard HDPE processing equipment with adequate melt homogenization
Regulatory Compliance
- FDA 21 CFR 177.1520(c) – food contact compliant under specified conditions
- ASTM D4976 – PE 235 classification
- Drug Master File #1016 (Chevron Phillips)
- REACH registered
- RoHS compliant
Storage Conditions
- Store in a cool, dry, well-ventilated area
- Keep containers closed to prevent moisture absorption
- Shelf life: indefinite when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before handling
- Non-hazardous under normal conditions of use
- Avoid dust generation; use local exhaust ventilation if needed
- Not classified as hazardous per GHS/CLP
Notes From Seller:
- The amounts above are in kg and purchases must be a multiple of 100 kg
- Stock availability depends on your shipping area
- Prices do not include VAT
- Free Shipping above 5.000 kg
| Brand | Marlex |
|---|---|
| Manufacturer | Bukitmega Masabadi |
0
0 reviews
There are no reviews for this product yet.