TITANVENE HD 4801 GA
JAVA
HDPE
Blown Moulding
Bukitmega Masabadi
0 (0 ulasan)
Bukitmega Masabadi
Lihat Profil SellerHigh-molecular-weight HDPE for blow-molded containers and industrial applications
TITANVENE™ HD 4801 GA is a high-molecular-weight high-density polyethylene (HDPE) resin made with hexene comonomer. It is designed for extrusion and blow molding applications, including containers with capacities of 5 to 30 liters. The grade combines impact strength and environmental stress cracking resistance (ESCR), with low odor and low fuming during processing as described in the supplied product information.
Specifications
- Material Type: High Density Polyethylene (HDPE)
- Melt Flow Rate (190 °C / 2.16 kg): 0.1 g/10 min (ISO 1133)
- Melt Flow Rate (190 °C / 21.6 kg): 11 g/10 min (ISO 1133)
- Nominal Density: 0.948 g/cm3 (ISO 1183)
- Vicat Softening Point: 126 °C (ISO 306)
- Tensile Stress at Yield: 24 MPa (ISO/R 527)
- Elongation at Break: 1300%
- Charpy Impact Strength: 17 kJ/m2 (ISO 179)
- Flexural Modulus: 1450 MPa (ISO 178)
- ESCR (Condition B, F50): 600 hours (ASTM D1693)
- Hardness: 61 Shore D (ISO 868)
Applications
- Blow Molding: Containers with capacities of 5 to 30 liters for toiletries, industrial chemicals, and oils, subject to contents compatibility.
- Food and Pharmaceutical Packaging: Container applications subject to applicable regulatory requirements and conditions of use.
- Industrial: Non-pressure pipes and conduits.
- Consumer Goods: Personal products and synthetic rattan.
Key Properties
- Impact strength and environmental stress cracking resistance for container applications.
- Processability for extrusion and blow molding.
- Low odor and low fuming during processing, as described in the supplied product information.
- Reported elongation at break of 1300%.
Processing Conditions
- Method: Blow molding.
- Reported Processing Temperature Range: 170–210 °C on conventional polyethylene processing equipment.
- Thermal Precaution: The supplied safety information indicates that heating above 300 °C may generate irritating vapors and decomposition products, including carbon monoxide and aldehydes.
Storage & Handling
- Storage Environment: Store at ambient temperature in a dry, ventilated area away from direct sunlight.
- Heat Sources: Keep away from sources of heat and highly flammable materials.
- Spill Handling: Spilled granules present a slipping hazard and should be swept up promptly.
Safety Information
- Thermal Hazards: Molten material can cause severe thermal burns. Use appropriate heat-resistant gloves when handling hot material.
- Ventilation: Use local exhaust ventilation to limit exposure to fumes from heated material.
- Eye Protection: Use appropriate protective eyewear for dust and splash hazards.
- GHS Classification: Reported as not classified as hazardous in the supplied safety information. Refer to the current manufacturer safety data sheet for applicable handling requirements.
| Brand | Lotte Chemical |
|---|---|
| Manufacturer | Lotte Chemical Indonesia |
0
0 reviews
There are no reviews for this product yet.