EVAFLEX EV40WH
JAVA
EVA
Adhesive & Coating
Cipta Mulia Buana
Cipta Mulia Buana
Lihat Profil SellerHigh-Flexibility EVA Resin with 41% Vinyl Acetate for Low-Temperature Processing and Superior Elongation
EVAFLEX™ EV40WH is a high-performance ethylene-vinyl acetate (EVA) copolymer engineered for applications demanding exceptional flexibility, softness, and ease of processing. With a vinyl acetate content of 41%, it offers an optimal balance between elasticity and structural integrity. Its low melting point (~49°C) and high melt flow index (65 g/10 min) enable energy-efficient processing on standard extrusion and injection molding equipment. Ideal for manufacturing flexible films, cushioning components, adhesives, and soft-touch products, EV40WH delivers consistent mechanical performance batch after batch. Rigorously tested per JIS standards, this resin ensures reliability in demanding industrial environments while maintaining a lightweight profile (density: 970 kg/m³) and outstanding elongation (>1000%).
Specifications
- Vinyl Acetate Content: 41% (JIS K 6760)
- Melting Point: 49 °C (DSC (JIS K 7121))
- Tensile Strength at Break: 3 MPa (JIS K 6251)
- Tensile Elongation at Break: >1000% (JIS K 6251)
- Shore A Hardness: 49 (JIS K 6253)
- Flexural Modulus (Stiffness): 1 MPa (JIS K 7127)
- Density: 970 kg/m³ (JIS K 7112)
- Melt Flow Index (MFI): 65 g/10 min (JIS K 7210 (190°C, 2.16 kg))
- Vicat Softening Point: <30 °C (JIS K 7206)
Applications
- Flexible packaging films
- Cushioning and padding for sports equipment
- Automotive interior trim components
- Soft-touch grips and handles
- Hot-melt adhesives
- Foam sheets and profiles
- Sealants and gaskets
- Toys requiring high flexibility and safety
Advantages
- Exceptional elongation (>1000%) for high impact resistance
- Low melting point enables energy-efficient processing
- High melt flow index ensures smooth extrusion and molding
- Balanced softness (Shore A 49) and tensile strength (3 MPa)
- Lightweight due to low density (970 kg/m³)
- Consistent quality backed by JIS-standard testing
- Versatile across film, foam, and molded applications
Processing Conditions
- Extrusion temperature range: 80–140°C
- Injection molding temperature: 90–130°C
- Low processing temperatures reduce energy consumption
- Compatible with standard LDPE processing equipment
- Avoid prolonged residence time above 150°C to prevent degradation
Regulatory Compliance
- Manufactured under ISO 9001 quality management system
- Complies with general industrial chemical handling standards
- Not intended for direct food contact unless specifically certified
- Check local regulations for end-use compliance (e.g., FDA, REACH)
Storage Conditions
- Store in a cool, dry, well-ventilated area
- Keep containers tightly closed to prevent moisture absorption
- Recommended storage temperature: below 30°C
- Shelf life: 12 months when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before handling
- Use appropriate PPE including gloves and eye protection
- Avoid inhalation of dust or fumes during processing
- Thermal decomposition may release acetic acid and other irritants—ensure adequate ventilation
| Brand | Evaflex |
|---|---|
| Manufacturer | Dow Mitsui Polychemicals |
0
0 reviews
There are no reviews for this product yet.