RAMAPET N1
MEDAN
PET
Bottle Grade
Cipta Mulia Buana
Cipta Mulia Buana
Lihat Profil SellerVersatile, FDA-compliant PET copolymer for carbonated drinks, pharmaceuticals, and heat-set packaging
RAMAPET N1 is a general-purpose, food-grade PET copolymer engineered for high-performance packaging applications. Ideal for carbonated soft drinks, alcoholic beverages, pharmaceutical containers, and agrochemical packaging, it offers excellent mechanical strength, dimensional stability, and optical clarity. This resin is also suitable for heat-set blow molding (e.g., hot-fill sauces and sterilized medical containers) and APET sheet/film extrusion. With low moisture content (≤0.2 wt%) and high crystallinity (≥50%), RAMAPET N1 ensures consistent processing, superior barrier properties, and minimal warpage. Its color can be customized, and uniform chip size (70 ± 5 pieces/gram) supports reliable feeding in automated systems. Every batch complies with global food-contact regulations and undergoes rigorous quality control.
Specifications
- Intrinsic Viscosity: 0.80 ± 0.02 dL/g (IR-001 (Ubbelohde Viscometer))
- Acetaldehyde: ≤ 1 ppm (IR-002 (Gas Chromatograph))
- Melting Point: 247 ± 2 °C (IR-003 (Differential Scanning Calorimeter))
- Color b*: -1.5 ± 1.5 (IR-004 (CIE Lab))
- Crystallinity: ≥ 50 % (IR-005 (Density Gradient Column))
- Moisture Content: ≤ 0.2 wt% (IR-006 (Gravimetric Method))
- Chips per Gram: 70 ± 5 pieces (IR-007 (Weighment Method))
Applications
- Carbonated beverage bottles
- Alcoholic drink containers
- Pharmaceutical packaging
- Agrochemical containers
- Heat-set blow molded jars (hot-fill)
- APET sheet and film extrusion
- Medical sterilizable containers
Advantages
- FDA and EC compliant for food contact
- High crystallinity for excellent barrier properties
- Low acetaldehyde for taste-sensitive beverages
- Uniform chip size for consistent processing
- Suitable for both standard and heat-set molding
- Customizable color options
- Low moisture content minimizes degradation during processing
Processing Conditions
- Dry thoroughly before processing (recommended drying: 150–160°C for 4–6 hours)
- Extrusion temperature range: 270–290°C
- Mold temperature for heat-set applications: 100–140°C
- Use desiccant dryers to maintain moisture < 50 ppm during processing
Regulatory Compliance
- FDA 21 CFR §177.1630
- EC Regulation 90/128/EEC
- Non-mutagenic (Ames test negative)
- LD50 > 2000 mg/kg (low oral toxicity)
- REACH registered
- Not classified as carcinogenic under IARC, OSHA, or EU CLP
Packaging Information
- 25 kg multi-wall polyethylene-lined bags
- 1,000 kg jumbo bags (FIBCs) available on request
Storage Conditions
- Store in original sealed packaging in a cool, dry area
- Protect from moisture and direct sunlight
- Shelf life: 12 months when stored properly
Safety Information
- Avoid inhalation of dust during handling
- Use local exhaust ventilation in processing areas
- Molten polymer may cause thermal burns—use appropriate PPE
- In case of eye contact: flush immediately with water
- Refer to Safety Data Sheet (SDS) for full handling and emergency procedures
Notes From Seller:
- Stock availability depends on your shipping area
- The amounts above are in kg
- The amounts above are in kg and purchases must be a multiple of 1.150 kg
- Prices do not include VAT
| Brand | Indorama PET |
|---|---|
| Manufacturer | Indorama Polypet Indonesia |
0
0 reviews
There are no reviews for this product yet.