ABS DG-417
JAVA
ABS
Injection
Dharma Luas Putra
Dharma Luas Putra
Lihat Profil SellerThe Reliable Workhorse for Everyday Manufacturing
When you need a plastic that can handle the demands of modern manufacturing without breaking the bank, ABS DG-417 is your go-to solution. Engineered by Dagu Chemical, this general-purpose injection molding grade resin strikes the perfect balance between strength, processability, and cost-efficiency. With a melt flow index of 20 g/10min at 220°C, it flows smoothly into complex molds, ensuring consistent part quality even in high-volume production. Its medium impact resistance makes it ideal for products that must withstand daily wear and tear — think appliance housings, automotive trim, or electronic enclosures. Whether you’re building a new product line or replacing an aging material, DG-417 delivers predictable performance you can count on.
Specifications
- Melt Flow Index (220°C/10 kg): 20 g/10 min (ASTM D1238)
- Tensile Stress at Yield: 47 MPa (ASTM D638)
- Flexural Strength: 65 MPa (ASTM D790)
- Flexural Modulus: 2265 MPa (ASTM D790)
- Izod Notched Impact Strength: 200 J/m (ASTM D256)
- Vicat Softening Temperature: 101°C (ASTM D1525)
Applications
- Appliance housings (e.g., vacuum cleaners, kitchen appliances)
- Automotive interior trim and non-structural components
- Electronic device enclosures (e.g., power tools, computer peripherals)
- Consumer goods requiring moderate impact resistance
- Toys and recreational equipment
- Office equipment housings
Advantages
- Balanced mechanical properties for everyday durability
- Excellent processability with low scrap rates
- High dimensional stability and rigidity
- Good impact resistance for consumer applications
- Cost-effective alternative to premium ABS grades
- Consistent batch-to-batch performance
Processing Conditions
- Pre-dry at 80–90°C for 2–4 hours until moisture < 0.01%
- Melt temperature: 190–230°C
- Mold temperature: 40–80°C (typical)
- Ensure adequate venting to avoid surface defects
- Standard screw compression ratio recommended for ABS
Regulatory Compliance
- Meets ASTM standards for mechanical and thermal properties
- Compliant with general industrial safety guidelines
- Not specifically certified for food contact or medical use unless otherwise stated
Storage Conditions
- Store in a cool, dry place below 30°C
- Keep containers sealed to prevent moisture absorption
- Shelf life: 12 months when stored properly
Safety Information
- Avoid inhalation of dust or fumes during processing
- Use standard PPE including gloves and eye protection
- Refer to Safety Data Sheet (SDS) for full handling and emergency measures
| Brand | Tianjin Dagu |
|---|---|
| Manufacturer | Tianjin Dagu Chemical Industry |
0
0 reviews
There are no reviews for this product yet.