PA66 GF30 MVM270G6L BLACK
JAVA
PA66
PA66 Glass Fiber
Dharma Luas Putra
Dharma Luas Putra
Lihat Profil Seller30% Glass-Fiber Reinforced Nylon 66 for High-Strength, Heat-Resistant Applications
PA66 GF30 MVM270G6L BLACK is a high-performance engineering thermoplastic based on polyamide 66 (nylon 66) reinforced with 30% glass fiber. This black-grade compound delivers exceptional mechanical strength, dimensional stability, and thermal resistance, making it ideal for demanding structural applications in automotive, electronics, and industrial machinery. With a density of 1.34 g/cm³, it offers lightweight performance without compromising rigidity or durability. The material exhibits excellent resistance to wear, creep, and impact, and maintains integrity under continuous stress and elevated temperatures. Its UL94 HB flame rating ensures suitability for consumer and industrial enclosures requiring basic fire safety compliance.
Specifications
- Density: 1.34 g/cm³ (ISO 1183)
- Tensile Strength: 130 MPa (ISO 527)
- Tensile Modulus: 7100 MPa (ISO 527-1/-2)
- Elongation at Break: 6% (ISO 527-1/-2)
- Flexural Strength: 200 MPa (ISO 178)
- Flexural Modulus: 6400 MPa (ISO 178)
- Notched Impact Strength (Izod): 6 kJ/m² (ISO 180)
- Heat Deflection Temperature (1.82 MPa): 70°C (ISO 75)
- Melting Point: >270°C (DSC)
- Flame Rating: UL94 HB (UL 94)
Applications
- Automotive gear housings and connectors
- Under-the-hood components
- Electrical enclosures and switch housings
- Relays and power tool casings
- Industrial machinery parts
- Sporting equipment requiring stiffness and impact resistance
Advantages
- High tensile and flexural strength due to 30% glass fiber reinforcement
- Excellent dimensional stability and low creep
- Good heat resistance up to 70°C under load
- Lightweight with density of 1.34 g/cm³
- UL94 HB flame retardant rating
- Consistent performance across batches per ISO standards
Processing Conditions
- Pre-drying: 90°C for 3–4 hours
- Mold temperature: 70–90°C
- Ensure dry processing to avoid hydrolysis and surface defects
- Standard injection molding parameters suitable for glass-filled nylons
Regulatory Compliance
- UL94 HB
- ISO 527
- ISO 178
- ISO 180
- ISO 75
- ISO 1183
Storage Conditions
- Store in dry, cool conditions below 30°C
- Keep sealed until use to prevent moisture absorption
- Shelf life: 12 months when stored properly
Safety Information
- Avoid inhalation of dust during handling
- Use standard PPE (gloves, safety glasses)
- Refer to Safety Data Sheet (SDS) for full handling and disposal guidelines
| Brand | MovoMer |
|---|---|
| Manufacturer | PT. DHARMA LUAS PUTRA |
0
0 reviews
There are no reviews for this product yet.