RECYCLE HIPS BK
JAVA
rHIPS
Injection
Sojitz Indonesia
0 (0 ulasan)
Sojitz Indonesia
Lihat Profil SellerRecycled high impact polystyrene (HIPS) black pellets for general-purpose injection molding applications
RECYCLE HIPS BK is a recycled High Impact Polystyrene (HIPS) material supplied in black pellet form and designed for injection molding applications. This grade offers a balanced combination of stiffness, strength, and impact resistance, making it suitable for general-purpose plastic components. As a recycled material, it is intended for applications where cost efficiency and material reuse are prioritized over certified or tightly controlled specifications.
Specifications
- Material Type: Recycled High Impact Polystyrene (HIPS)
- Grade Type: Injection molding grade
- Form: Pellets
- Color: Black (BK)
- Specific Gravity: 1.047 g/cm³ (ASTM D792, 23°C)
- Melt Flow Rate (MFR): 3.4 g/10 min (ASTM D1238, 200°C / 5 kg)
Mechanical Properties
- Tensile Strength: 40.68 MPa (ASTM D638, 50 mm/min)
- Tensile Elongation: 7% (ASTM D638, 50 mm/min)
- Flexural Strength: 64.61 MPa (ASTM D790, 2.8 mm/min)
- Flexural Modulus: 2415.56 MPa (ASTM D790, 2.8 mm/min)
- Notched Izod Impact Strength (1/8"): 50.9 J/m (ASTM D256)
Applications
- General-purpose injection molded HIPS products
- Industrial plastic components
- Non-critical housings and covers
- Applications utilizing recycled HIPS material
Advantages
- Injection-grade recycled HIPS material
- Good balance of stiffness and impact resistance
- Low melt flow suitable for stable molding of thicker parts
- Cost-effective alternative to virgin HIPS
- Supports sustainability and recycled material usage
Processing Conditions
- Designed for injection molding processes
- Processing parameters should be optimized based on part design and machine settings
- Trial molding is recommended prior to mass production
Regulatory & Usage Notes
- Material properties are based on laboratory test results and may vary between batches
- Not rated for flame retardancy (UL 94 not classified)
- Not recommended for applications requiring certified regulatory approval
- RoHS elements tested via XRF spectroscopy
Storage Conditions
- Store in a dry, covered environment
- Protect from moisture, dust, and contamination
- Avoid prolonged exposure to direct sunlight
Safety Information
- Refer to available Safety Data Sheet (SDS) before handling
- Use appropriate PPE during handling and injection molding
- Molten material may cause thermal burns
Masuk untuk melihat harga