POM ULTRAFORM N2320 008 NATURAL
JAVA AREA
POM Resin
Injection
Dharma Luas Putra
Dharma Luas Putra
Lihat Profil SellerHigh-Performance, Dimensionally Stable POM Resin for Precision Industrial Components
ULTRAFORM® N2320 008 AT is a high-performance, uncolored polyacetal (POM) homopolymer engineered for industrial applications demanding exceptional mechanical strength, low friction, wear resistance, and dimensional stability. Ideal for injection molding, extrusion, and blow molding, this resin maintains consistent properties even in humid environments due to its low moisture absorption (0.8% at equilibrium). It offers excellent chemical resistance against oils, solvents, and mild acids, and remains thermally stable up to 175°C during processing. With a UL94 HB flammability rating and no hazardous classification under normal handling conditions, it’s a safe, reliable choice for automotive, electronics, consumer goods, and industrial machinery components such as gears, bearings, and connectors.
Specifications
- Density: 1400 kg/m³ (ISO 1183)
- Tensile Modulus: 2700 MPa (ISO 527)
- Yield Stress: 65 MPa (ISO 527)
- Charpy Notched Impact Strength: 6 kJ/m² (ISO 179)
- Melting Range: 160–175°C (DSC)
- Maximum Continuous Service Temperature: 100°C (short-term) (ISO 2578)
- Melt Volume-Flow Rate (MVR): 7.5 cm³/10 min (ISO 1133 (190°C, 2.16 kg))
- Mold Shrinkage: 2.10% (parallel & normal) (ISO 294)
- Equilibrium Water Absorption: 0.8% (ISO 62)
- Bulk Density: 850 kg/m³ (ISO 60)
Applications
- Gears and sprockets
- Bearings and bushings
- Electrical connectors and housings
- Automotive fuel system components
- Industrial valves and pumps
- Consumer appliance parts
- Precision mechanical components
Advantages
- Excellent dimensional stability with low moisture absorption
- High mechanical strength and stiffness
- Outstanding wear and abrasion resistance
- Low coefficient of friction
- Good chemical resistance to oils, greases, and solvents
- Predictable mold shrinkage for tight-tolerance parts
- UL94 HB flammability rating for enhanced safety
- Easy to process via injection molding and extrusion
Processing Conditions
- Drying recommended if exposed to humidity: 80–90°C for 2–4 hours
- Melt temperature: 190–210°C
- Mold temperature: 80–120°C
- Avoid processing above 240°C to prevent decomposition and formaldehyde release
- Ensure adequate ventilation during processing
Regulatory Compliance
- Not classified as hazardous under GHS/CLP
- REACH compliant
- RoHS compliant
- UL94 HB flammability rating
- No SVHCs above threshold (per latest REACH SVHC list)
Storage Conditions
- Store in dry, well-ventilated area
- Keep containers sealed to prevent moisture uptake
- Shelf life: 12 months when stored properly
Safety Information
- Not classified as hazardous under normal handling
- Avoid inhalation of fumes during overheating (>240°C)
- Thermal decomposition may release formaldehyde—use local exhaust ventilation
- Molten polymer can cause thermal burns—use appropriate PPE
- Refer to Safety Data Sheet (SDS) for full handling instructions
| Brand | Ultraform |
|---|---|
| Manufacturer | BASF |
0
0 reviews
There are no reviews for this product yet.