STERLENE HMU210
JAVA
PP Compound
PP Talc
Sojitz Indonesia
0 (0 ulasan)
Sojitz Indonesia
Lihat Profil Seller20% talc-filled polypropylene compound with good dimensional stability and heat resistance for automotive under-hood applications
STERLENE™ HMU210 is a specialty 20% talc-filled polypropylene compound (PP-TD20) developed to deliver good dimensional stability and reliable heat resistance. Designed primarily for automotive under-hood applications, this material offers a balanced combination of stiffness, thermal performance, and processability. Supplied in pellet form, HMU210 is suitable for injection molding and can be produced in black, natural, or customized colors to meet specific application requirements.
Specifications
- Melt Flow Rate (MFR): 12 g/10 min (ISO 1133/B, 230°C / 2.16 kg)
- Density: 1.05 g/cm³ (ISO 1183)
- Tensile Strength at Yield: 30 MPa (ISO 527/5)
- Tensile Modulus: 2850 MPa (ISO 527/5)
- Elongation at Yield: 5.0% (ISO 527/5)
- Flexural Strength: 50 MPa (ISO 178)
- Flexural Modulus: 2800 MPa (ISO 178)
- Izod Notched Impact Strength @ 23°C: 4.2 kJ/m² (ISO 180/B)
- HDT @ 1.8 MPa (85°C × 2h anneal): 87°C (ISO 75-2/A)
- HDT @ 0.45 MPa: 120°C (ISO 75-2/B)
Applications
- Automotive under-hood components
- Automotive parts requiring dimensional stability
- Heat-resistant injection molded components
Advantages
- Good dimensional stability
- Good heat resistance for elevated temperature environments
- High stiffness due to talc reinforcement
- Suitable for injection molding processes
- Available in black, natural, and customized colors
Processing Conditions
- Processing Method: Injection molding
- Pre-drying: Recommended for at least 2 hours using conventional dryers or hoppers
- Melt Temperature: 190–240°C
- Mold Temperature: 25–60°C
Regulatory & Usage Notes
- Not intended for food contact applications
- Not intended for medical applications
- Typical values are for reference only and not specifications
- Users should evaluate suitability under actual processing and service conditions
Form & Availability
- Form: Pellets
- Manufacturing Locations: China, Malaysia
Safety Information
- Refer to relevant Safety Data Sheet (SDS) before handling
- Use appropriate PPE during processing
- Molten polymer may cause thermal burns
Masuk untuk melihat harga